608 internal spool holder - remixed

I updated the model to allow the wheel to be mounted against the panel instead of away from it.  I also widened the base of the bottom mounts so that they can be installed with the wheel attached (should use ball head style hex driver).  I printed mine out of PC-ABS, but use what is best for your environment.

The standard m3 Voron heat set is installed into the plug which allows the screw to come from the backside of the wheel mount and this allows for a tighter fit against the panel.  

-- Update - 2025-12-13

Adding V4 of models.  This is a much tighter to panel fit and allows for more distance from bed.  This version is compatible with the same bearing mount and plug and only the base mount part is changed.

-- Update - 2025-12-14

Adding V5 of models.  This just adds a support block for the screw hole for the standard base and also includes bowden tube guides for the front and back of the spool to allow for front loading of filament.

I included the fusion and/or step files for remixing.

Instead of the m3 heat set going into the wheel mounts, it is now in the plugs and the wheels mount against the panels.