Zip archive contains three options for the microscope shell.
For build, you will need the following components:
IP camera 1 pcs
or
DC-DC Boost Power Module 1 pcs (for Micro Shell_B1 and Micro Shell_B2)
DC Connector (5.5 mm x 2.1 mm size plug) 1 pcs (for Micro Shell_A1 only)
USB 3.1 Type-C 1 pcs (for Micro Shell_B1 and Micro Shell_B2)
Dupont 3 pin socket 1 pcs
RJ45 Ethernet socket SMT SMD 56 8P8C 1 pcs
jst 1.25 mm 8 pin socket 1 pcs
Screw M3x5 3 pcs
or
Acorn Nut M3 3 pcs
Screw M2x5 4 pcs
Screw M2x5 4 pcs
unused lens something like: INDUSTAR-61 L/D 53 mm f/2.8 M39, or JUPITER 37A 135 mm f/3.5 M42 (for more magnification), or any other lens with similar characteristics. Some 30AWG wires, solder wire, flux,
T-8000 glue for thread lock 3D printed parts and fix sockets and wires.
Good luck!
The author marked this model as their own original creation.