Fidget Clicker keychain with magnet base

This is not a remix, it is an original model that i made. That being said, it's basically an imitation of this model made by @CaesarOfSala_1985504. 

I really like their model, and several of my kids have them. But I found myself wishing it had a magnetic base so i could stick it to the metal center console in my van. I'm not good at remixing, so I just built my own from scratch. It's thicker than Caesar's to account for the 8x3mm magnets, but it's still as thin as i could manage it. 
 

Prints well at 0.2mm layers, I used 15% gyroid infill which even that was probably overkill for a fidget. Supports are needed on the keychain loop to prevent sagging, the magnet holes would probably print fine without supports but i used them anyway. 

Requires 3- cherry mx compatible switches (I prefer clicky blue) and 2- 8x3mm neodymium magnets.

EDIT: I think this is fun, but I wanted a second row. So I modified it to be a 2x2 pattern, with 4 magnets and 4 switches.  THEN my son declared he wanted one that had 9 buttons, but no magnets. So now there's also an option for a 3x3, requiring 9 switches but no magnet cutouts.