Light switch cover for unwanted switching of the lights.
Should you want to switch the light, the cover can easily pop off without unscrewing the bracket by squeezing the side or top depending on one gang or two gang version.
Bracket installs using existing light switch cover plate screws.
Make sure to print the cover top down to the print bed. Everything can be printed without support. If the bracket locking tabs don't fit properly then consider printing the bracket with support for the tabs.
:: Update 03.04.22 ::
Added .2mm wider bracket opening tolerance for both version to allow easier insertion of the cover. Use .1mm tolerance version for a tighter fit if you like it tight! :P
The author marked this model as their own original creation.