V-Core 3.2H tensioner arm
A set from Funsor is not being delivered to my region, I had to make my own with a landing m3 hex nut.print not standing
0
3
0
15
updated
November 28, 2025
Description
PDFI had to make my own with a landing m3 hex nut.
Model origin
The author remixed this model.
Differences of the remix compared to the original
This is the original part from V-core 3.2h printed from ASA gf, layer 0.12, walls ,bottom, top filling 5, filling 20,print not standing, but lying on the table
