FormFutura Refill 2.0 Spool Adapter

This 3D printed adapter allows you to use FormFutura Refill 2.0 spools with your Bambu Lab Spools. It's a cost-effective and eco-friendly way to continue using your Refill spools, minimizing waste and saving on new spool purchases. Easy to print and install.

Instructions (also refer to images above)

1. Prepare the Bambu Spool: Place the Bambu spool on a flat surface, noting the side with the small notch.
2. Position the FormFutura Spool: Center the FormFutura spool on top of the Bambu spool.
3. Align the Adapter: Place the adapter on top of the FormFutura spool, ensuring the notch on the adapter aligns with the notch on the Bambu spool.
4. Secure the Assembly: Place the other half of the Bambu spool on top of the adapter, locking it into place.
5. Release and Load: Untie the Velcro straps on the FormFutura spool. Your adapted spool is now ready to be loaded into the printer.