Vacuum hose coupler

This model is one of my first works in Fusion that resulted in a printed piece. It is made from a blank sketch in Fusion, following the prinipal instructions of DIYwithJJ. The model is of a different size, has a slightly different approach to chamfered edges and fillets and is serving different brands than the original. It came to be because I couldn't find the dimensions I needed for a repair.

The model has ten turns, leaving five full revolutions per end for a snug meet in the middle.

The model is of a different size, has a slightly different approach to chamfered edges and fillets and is serving different brands than the original.