Coat rack/ hanger/ Wardrobe ─ with wooden rod

A clean, modular coat rack that combines sturdy 3D-printed parts with a round wooden rod. Available for 20 mm and 25 mm diameter rods.
Simply clamp the wooden rod in place using the set screw.

In the picture, you can see a black stained 20 mm rod.

Hardware

• ⌀20/25 mm wooden rod 

• M3 hex nut (2x)

• M3 set screw (2x)

• Wood screw for mounting(4x)

Print settings

• 4 Perimeters

• 20% infill

• No supports needed