Skadis Keyboard/Plate

Simple key board 

The idea came about when I was on a trip in our camper, the hatches to the garage, toilet, gas and water must always be unlocked with a key, and I was always missing the keys. 

NOW.. they are collected in one place, right inside the door. 

Description: 

This key board is designed to be able to grab the keys in a quick way. You grab the key ring and go.... 

The key ring is mounted with a small magnet that fits the holder on the key board. SIMPLE:... 

You decide what text should be on it, this can be done in your favorite Slicer. 

Instructions: 

You will need: 8 -16 pcs. magnets Ø 5 mm. x 8.47 mm. 

The holder must be sliced until layer approx. 58, where the hole for the magnet is exposed, the slicer is paused, and the magnet is mounted, then printing continues.