Adjustable Coupling Bar for OpenRC F1

Adjustable coupling bar to connect the servo saver of an OpenRC F1 car to the servo motor. Tighten the nut near the head of the M3x30 bolt to secure the servo saver side the bring another nut down near the first. These don't need to be nyloc nuts, but you don't want it coming loose when you're driving. Use the second nut to set the length of the coupling bar with the midpoint of the servo at its midpoint, preferably with the arm facing straight up.

Print Settings

Printer:

HICTOP Prusa i3 MK8

Supports:

Yes

Resolution:

0.2

Infill:

20

Filament: AMZ3D PLA Red