Twin loc-line arm mount for camera tripod socket

This mount allows you to attach 2x Loc-Line arms to the bottom of your camera using its tripod socket.

Print settings:

• Layer height: Not critical, I used 0.2mm
• Filament: Anything, I used PLA
• Infill: 20% grid
• Perimeters: 3

Parts required:

• 1/4-20 1" long screw for tripod socket
• 1/2" Loc-Line Fixed Mount x 2 (part number 51895)
• 1/2" Loc-Line segments as required to get the length of arms you want

Plus, for the 180-degree version:

• 1/4-20 1 3/4" long screw for joining Loc-Line cups x1
• 1/4-20 hex nut x 1

Or for the 90-degree version:

• 1/4-20 1" long screw x2
• 1/4-20 hex nut x 2

The 90-degree version is better at keeping away from the bottom of the camera's hand grip (so avoids blocking your hand's grip).

If you liked this design you'll probably like my other macro-photography focused designs, please check them out:

https://www.printables.com/social/25723-thenickdude/models

Print Settings

Rafts/Supports: No

Resolution: 0.2mm

Infill: 20%

Filament: PLA, e.g. Prusament PLA Mystic Brown