Multiboard Multipoint Cable Tie Organizer

Attach to your board with four single Multipoints or two Multipoint rails.

NOTE: Photos are from an earlier prototype but OrcaSlicer kept crashing when I tried to export. The STL I finally managed to save has slightly shorter Multipoint rails but still mounts the same way and should be more than sufficient unless you're filling it with lead or tungsten.

Suggested print settings:

• 0.4mm nozzle/line width
• 0.2mm layer height
• 3 perimeters
• 3 top/bottom layers
• 10-15% honeycomb infill

Removed magnet cavities, added Multipoint rail cutouts.