Pumpkin Ghost Halloween Bucket V2

No supports are needed, except for under the clips at the ends of the handle. Once these are removed, the handle will clip into the receptacles added behind the “arms” of the container.

The lid can go on in any orientation.

At 100% scale (STL files) the container has an improved internal capacity of ~2.4L. Scaling this down to 90% (3MF file) yields about 1.75L, and 80% about 1.2L.

The inside bottom of the container has been coloured orange to speed up print time through elimination of tool changes. If you prefer all white inside, simply bucket fill the inside orange bit white!

• Reduced model volume by almost 50%
• Increased internal capacity by 20%
• Fixed overhang printing issues on the bottom