Kratos God Of War Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

The Model is 133.33x200mm in size 

You may print at higher layer heights below the Base Thickness of 0.48mm. The Max allowed Thickness is 2mm and the Actual Thickness is 2mm 

Filaments Used: 
PLA PolyLite Black Transmission Distance: 0.3 
PLA Flashforge White Transmission Distance: 10 
PLA+ Esun Fire Engine Red Transmission Distance: 2 

This print uses 3 unique filaments 
Swap Instructions: 
Start with Black 
At layer #6 (0.56mm) swap to White 
At layer #13 (1.12mm) swap to Black 
At layer #18 (1.52mm) swap to Fire Engine Red 
At layer #21 (1.76mm) swap to White for the rest.