Halloween themed fidget slider with 4mm magnet

This is a Halloween themed version of the little magnetic sliding fidget That I made, as it is getting close to the season.

Make a bunch and hand them out, or make it for yourself

It uses 3 - 4x1mm magnets.

I made it to suit the magnets I have, but if you need it with different sizes, let me know and i can make a variation to suit.

The easiest way to get the magnets in the hole is to snap one in the button first, using something hard to press it in.

Then you can attach a magnet to the one on the coin part, and use it to align the ones in the slider body.

You may need to take a hobby knife or similar, and run around the edges of the holes to debur them a little.

The magnets are a tight fit, so you might need something hard to press them all the way in, but I didn't need glue in my test versions.