Concentrator clamp, v3
Clamp to enforce the handle of oxygen concentrator, narrow version with hinge
1
11
0
53
updated
October 6, 2025
Description
PDFThis is an experimental device. Use with caution on your own risk.
Manufacturing instructions:
- Material: PETG
- 3D Printer: FDM 3D printer, average print time 1,5 hours (for set 2 clamps)
- Slicer settings: 0.2mm layer height, 4 perimeters.
- Post processing instructions:
- Connect the top and bottom parts with the M6x30 bolt and nylon M6 nylon locking nut
- Use M6x30 bolt and M6 nylon locking nut to attach the clamp to reinforce the handle.
Tags
Model origin
The author marked this model as their own original creation.