BLH-04 Hardball - An Xshot Fury X Reshell

An Xshot Fury X Reshell that converts the Fury X from bullpup talon to mag-in-grip 31k/nightingale/mini angled talon.

The magazine included in this fileset holds 10 darts. Shorter mags are not compatible.

Magazine Compatibility List:

BEST:

• Standard 3lk Mags - This blaster was designed around them.
• Included 31k magazine in the fileset

REQUIRES TWEAKS/OPTIONAL FILES:

• Nightingale Magazines/Mini Angled Talons that have the 31k cut. - These will feed, but the rubber ring seal on the pusher might be pulled off by the magazine.
• Venom mags/Dartzone Mags with the 31k cut. These do not have the pusher issue as mentioned with nightingale magazines.

UNTESTED:

• RedCowl Compound Mags
• 3lk “horizontal print” Mags - Dimensions are different than standard 31k mags.
• Vesper Magazines - these don't exist yet.

NOT COMPATIBLE:

• Diana magazines with a wide grip base.

Additional required hardware/parts:

• x3 m3 nuts
• x3 m3x25 bolts
• Superglue
• Lube
• (OPTIONAL) - Replacement pusher o-ring (xshot longshot pusher o-ring or equivalent. 14mm OD 10mm ID 2mm tube diameter.)

Build Guide: https://docs.google.com/presentation/d/1rXRvSU1CGtW3XrgD27BP_vR0ArvXyHxK7_wvF7E39KY/edit?usp=sharing

If you'd like to use a longer barrel, please use the “Red Cowl Collet” version and substitute the parts as named.

If you do not want the logos on the grip panels, please use “No Logo Grip” and substitute the parts as named.

31k File Repository: https://drive.google.com/drive/u/0/folders/1E0PVRUimsXT9qqWXhqq85TYIZZVnGRC2

RedCowl Collet of choice: https://www.printables.com/model/812491-low-profile-collet-for-redcowl-collet-system

UPDATE LOG

v1.01 - Grip panel mesh fix, as pointed out by @FIB_170804's remix.
v1.02 - "Magazine Stop" is now an optional file for users who only want to use the recommended 31k magazines. Build guide reflects this.
v1.03 - "Rear Frame" has been adjusted to better fit "Left Slide Rail" and "Right Slide Rail".
v1.04 - "Rear Frame", "Front Frame", and "Trigger Guard" mesh fix.
v1.05 - Feeding issues partially resolved with replacement o-ring. Xshot Longshot o-ring confirmed to feed better and maintain air seal, use other o-rings at your discretion.
v1.06 - Replacement "Dart Guide" file for better nightingale mag feeding compatibility has been added as pointed out by the remix by @JOP_3764735. This version should also have less artifacts as it is not a converted STL.