Magswitch 150 shim for Baltic birch (18mm)

This is a set of shims for the Magswitch 150 for use on Baltic Birch plywood which is only 18mm
6
36
1
205
updated March 1, 2022

Description

PDF

This is for the Magswitgh 150
Since the Magswitch mounting height is 3/4" and I use Baltic Birch (which is only 18mm) for my jigs which makes the switch sits proud of the base  by 1.05 mm which is not a good thing. So I made a couple of shims.
1 is contoured to the match the Magswitch body and the other is a plain square shim that fits the body of the Magswitch but is square on the outside larger than the switch itself.


printer settings

nozzle .4

resolution .2

Nozzle temp 230

heat bed 85

Print with 3-4 perimeters PETG or ABS.
20-35% infill
no supports
A shim setup for the Magswitch 95 can be found here
 

 

Tags



Model origin

The author marked this model as their own original creation.

License