wheel alignment gauge / bicycle centering gauge / Fahrrad Zentrierlehre

Additional components required

• 4 x nut M3
• 3 x countersunk screw M3 x 20 mm
• 1 x socket head screw M3 × 16 mm
• Aluminum square tube 15 × 15 × 650 mm
  • (glued into the knob_M3 using 2K epoxy or similar adhesive)

Print settings (no special recommendations)

• Material: PLA
• Nozzle: 0.4 mm or 0.6 mm
• Layer height: 0.15 mm or 0.2 mm
• Perimeters: 2 or 3
• Infill: 20% (Grid or Gyroid)
• Supports: Just for the Messklemme