Jackpot3 Box

Good box for the Jackpot3, fits the LowRider 4 CNC, and others.  Easily organize your wires while the built-in cooling system keeps convection pulling the heat out. Hot climates should use an optional fan (typically wired into the board power so it is always on).

Uses 6 M3x10mm screws. Optional fans use extra screws, the 5015 show uses 2 M3x20mm.

Jackpot3 CAD, https://cad.onshape.com/documents/586d99f7fa62d842cf001ba3/w/06ccd3c368e4566fc8ce42b1/e/d7e89e27274d1ff902b13141?renderMode=0&uiState=6945655fd523d23f466e5b57