HOTEND HOLDER for Flashforge Adventurer 5M / 5M Pro (remix with larger cutouts and provision for magnets)

9mmplease's hotend holder for the Flashforge Adventurer is a neat design as it allows easy access to the most common sizes of hotends.

However I had issues printing the original hotend with my 0.6mm nozzle at a 0.3mm layer height. The top of the hotends simply didn't fit into the grooved/ribbed openings. So I expanded these openings to not require the hotend top to fit into the grooves.
 

I also wanted the flexibility of moving the holder anywhere on my printer, so added depressions for press-fitting 5mmx2mm rare earth magnets. There is room for 6 magnets in total as the weight of the hotends seems to require this many.

Enlarged the top cutouts to fit the top of the hotend more easily.

Added 6 depressions for 5mmx2mm magnets on the back.