Can opener with magnet
Remix of the original model but adding a magnet
3
21
0
119
updated
October 3, 2025
Description
PDFI did not see the other remix with a magnet until I already edited the original, so here is mine. I added a magnet hole for a 6mm wide 2mm deep magnet. The opening is 6.2mm by 3.1mm. I added a drop of CA glue and voila! Printed with Elegoo Galaxy Purple PLA.
This is my first remix post, so if I screwed something up, let me know!
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Remix of the original with a 6.2mm by 3.1mm magnet opening