Pegboard Straight Hook Gridfinity Shelf

This shelf works on 1" pegboard systems. By using (2) 4" (100mm) long hooks, you can insert them into the shelf to mount it to the pegboard. By using metal hooks the shelf is capable of a lot more weight than it would be to print the attachment to the pegboard. Shelf top is based in Gridfinity system by Zach Freedman. 

Shelf is designed so that it could easily be removed from the peg hooks by sliding out, however for a more stable fit you could glue the shaft of the hook into the shelf (while spaced/oriented correctly on the pegboard). 

There are two versions - one is just a flat bottom, the other has ridges cut out to save on unnecessary material (may result in a longer print time though..) 

Important: The hooks used for this shelf are 4" (100mm) long hooks with a 45deg bent tip. Hooks are part of a 1" pegboard (spacing between peg holes) system. Each peg hook needs to be mounted 6" apart from eachother. 

Straight Hook Dimensions that work with this model are ~4" (~100mm) from the L-bend to the tip of the hook. See pictures showing dimensions. The tip of the hook should bend up 45deg from horizontal. The hooks I have are 3mm in diameter. If your hooks are larger you may have to bore out the holes a bit (I designed them at ~4mm).

Any rubber tips on the hooks will need to be removed so they fit in the shelf.