Socket Organizers
Description
PDFA variety of socket organizers that I printed to add some organization to my toolbox.
I printed two organizers for my 3/8" (9mm) drives (one for metric, one for SAE) and one for my 1/4" (6mm) drive sockets (both SAE and Metric).
The Spacing is quite high to allow for a variety of different sized sockets to fit. I recommend using the "Metric Socket Holder - 9mm" as it has a thinner base (thus saving unnecessary material).
The last "Long Socket Holder" was for my leftover long sockets that had diameters of about 12-14 mm.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Resolution:
.25mm layer height
Infill:
5-10
Notes:
Printed with both Village Plastics ABS and Polylite PLA.
For ABS, make sure you have a heated bed (I had mine at 110 C)
I used glue stick to hold down the abs from warping.
NOTE The STL Files are oriented incorrectly. Be sure to lay the flat side on the print surface.
How I Designed This
I made these using Solidworks. First made a base plate and then extruded 6mm and/or 9mm pegs from the base and added a chamfer to the top.
Very simple to recreate. Feel free to use the uploaded designs to edit for your use.
Category: OrganizationTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.