Play Kitchen Cooking Toy

This magnet toy can be used in a play kitchen or play store. The food can be “cut” between the magnets and so it comes apart like real food. The plastic knife is dull otherwise and poses no harm.

Printing:
Print all parts in the given orientation with all settings as you see fit. A manual color change might make it look a little more interesting

Assembly:
The knife: needs 3x M3x10 bolts (or similar) for assembly. 
All other parts: need some 5x2mm magnets in order for them to get “cut away”. Secure them in place with a generous amount of superglue 


Have fun printing, cutting and cooking :)

CHANGELOG 15.10.2025
Cheese: Repaired the middle chamfer and rotatet both parts in new orientation
Turnip: Replaced Magnetholes with new positions
Carrot: Scaled 10% bigger along Z-axis

Credit where credit is due:
Id higly recommend to visit the original models if you want to have a non cuttable version. They are modelled with a lot of care for detail, absolutelly lovely and are worth a visit. Especially “vegetable garden” by Rivess features a lot more vegetables and offers a lot more play value for the future, so go and check them out :)

Smal disclaymer:
Although all parts are scaled and cut in order to be big enough for them not to be a choking hazard, id higly recommend this toy to be used under supervision with smal children.
For toys that can come appart, EN 71-1 (Europe) and ASTM F963 (US) state the following: In order to be concidered a non choking hazard for children under 36 month, a single piece (That includes bolts and screws btw) should be big enough to not fit in a 57mmx31mm cylinder. If a toy features smaler pieces it is still good to go if the product features a note that it is only intended for children 36m and up.
These standards are for commercially sold toys but i think its a good thing to be on the save side ^^

Tomato: (Taken from “vegetable garden” by Rivess)
Scaled, cut and fited with holes for the magnet. The top part was also scaled a little different in order to make the stem nicely apear in green if only printed with a manual color change

Turnip:  (Taken from “vegetable garden” by Rivess)
Scaled, cut and fited with holes for the magnet. The bottom part was also scaled a little different in order to avoid it being to smal (no choking hazard) 

Carrot: 
Scaled and filled to make it one solid model. Cuts and magnet holes got added afterwards. The green stem part also got a little reinforcement.

Meat:
Scaled, cut and fitted with magnet holes. all the text got removed. the bone part is removeable now. Also some details got added to the back in order to mirro the front design.

Bread:
Scaled, cut and fitted with magnet holes. The Loaf part was made a little shorter (around half) and all parts got a rised area in the middle in order to add a manual color change.

Cheese:
Scaled, cut in half and fitted with magnet holes.