Wall Control Pegboard AMS Lite Mount

Wanted to wall mount my AMS lite to free up room on my table. Unfortunately I don't have the standard Ikea Skadis pegboard most people use. I found a Wall mount solution that looked great but needed to be modified to work with Wall Control. Thankfully there is a Wall Control project out there that has all sorts of hooks, brackets, tool holders etc, so I was able to whip up a mod fully in Orca Slicer and though I would share.

This is the Wall Control system project... https://www.printables.com/model/52618-ddd-printable-wall-control-system

This is the AMS Lite wall mount ... https://makerworld.com/en/models/101930-the-ultimate-modular-ams-lite-mounting-system#profileId-108518

Printed in Polymaker PLA-CF using "Voron" print specs. Supports on the little knubs of the wall cleat (see printed plate picture), my Bambu A1 was able to bridge/handle everything else without supports.

Fit is fairly tight right off the printer, but is fine once fitted and removed a few times.

**NOTE:*** there is some sort of error on the modified cleat from when I modded/meshed/merged some things together. You can safely ignore the error, not sure how to fix.

Print Settings

Printer Brand:

Bambu Lab

Printer:

Rafts:

Supports: