𝔾ℍ𝕆𝕊𝕋𝕐 - 𝕎𝕆𝕆ℍ!

3D Model Description – Halloween Ghost 🎃👻

A cute decorative ghost, perfect for Halloween, designed with a simple yet expressive style.

The model features:

• Stylized sheet-like shape with soft folds that mimic draped fabric.
• Raised arms on each side, giving it a dynamic and “surprised” look.
• Three oval cutouts: two for the eyes and one for the mouth, creating the classic spooky ghost expression.
• Flat stable base, allowing the model to stand upright on flat surfaces without extra support.
•  Size: scalable in printing (recommended height ~8–12 cm for decorative use).
•  Suggested material: White PLA or Glow-in-the-dark PLA (for a spooky glowing effect).
•  Optional variation: for a different look, you can print the ghost in white PLA and insert a Bambu Lab LED Flame Tea Light Candle ( link here ) inside, turning it into a glowing lantern-style decoration.
•  Print optimization: the model was sliced in Bambu Studio with Variable Layer Height enabled, to reduce the visibility of layer lines on curved areas like the upper arms and head, resulting in a smoother finish. The printing time difference compared to fixed layer height is minimal — only about 5 minutes longer.3D Model Description – Halloween Ghost 🎃👻

A cute decorative ghost, perfect for Halloween, designed with a simple yet expressive style.

The model features:

• Stylized sheet-like shape with soft folds that mimic draped fabric.
• Raised arms on each side, giving it a dynamic and “surprised” look.
• Three oval cutouts: two for the eyes and one for the mouth, creating the classic spooky ghost expression.
• Flat stable base, allowing the model to stand upright on flat surfaces without extra support.
•  Size: scalable in printing (recommended height ~8–12 cm for decorative use).
•  Suggested material: White PLA or Glow-in-the-dark PLA (for a spooky glowing effect).
•  Optional variation: for a different look, you can print the ghost in white PLA and insert a Bambu Lab LED Flame Tea Light Candle ( link here ) inside, turning it into a glowing lantern-style decoration.
•  Print optimization: the model was sliced in Bambu Studio with Variable Layer Height enabled, to reduce the visibility of layer lines on curved areas like the upper arms and head, resulting in a smoother finish. The printing time difference compared to fixed layer height is minimal — only about 5 minutes longer.

📐 Scaling for LED Flame Tea Light

• Current ghost size (base footprint): 62.5 × 37.5 mm (approx).
• Bambu Lab Flame Tea Light size: Ø 37.8 mm × H 18.9 mm.
• To fit the candle inside, you need to scale the ghost model by ~120–125%.
  • This increases the internal space at the base to comfortably accommodate the tea light.
  • Final height at 125% scaling: ~102 mm.
    📐 Scaling for LED Flame Tea Light
• Current ghost size (base footprint): 62.5 × 37.5 mm (approx).
• Bambu Lab Flame Tea Light size: Ø 37.8 mm × H 18.9 mm.
• To fit the candle inside, you need to scale the ghost model by ~120–125%.
  • This increases the internal space at the base to comfortably accommodate the tea light.
  • Final height at 125% scaling: ~102 mm.

I have also designed a model without legs, check this out:
https://makerworld.com/en/models/1802645#profileId-1922438

If you like the design, give it a try, share your feedback, text me if you have problems with it and don’t forget to leave a like — your support helps me keep improving and bringing new ideas to the community! 🚀💡