Magnetic Poop Container for Bambu Lab X1C / X1 / P1P / P1S
Magnetic poop container with four holes for magnets (10mm x 2.3mm) to be glued into.
2
31
0
153
updated
October 3, 2025
Description
PDFContact me if you plan to use magnets that are not 10mm x 2.3mm and I will alter the model to fit your needs. This will interfere with the stock filament spool holder on the rear of the printer, so an alternative spool location is required (see my Side Spool Holder model), however, this will not interfere with the AMS.
Model Dimensions: 3in x 3in x 9.88in
Material Used: Polymaker PolyLite PLA Pro, Metallic Chrome (SKU: PA07057)
My Print Settings - Printer: Bambu Lab X1C, Slicer: Bambu Studio, Build Plate: Textured PEI, Layer Height: 0.2mm, Wall Loops: 4, Infill: Grid at 15%, Supports: Tree (auto), Strong
Model origin
The author marked this model as their own original creation.
