Protective magnetic jaws for clamping – length 140 mm

The protective jaws are mirror-symmetrical and feature a positioning tab for alignment with the vise jaw. To ensure a flush fit with the top surface of the vise when clamping flat or small parts, the tab can be oriented either upward or downward, depending on the application.

Part list:

• protective jaw | quantity: 2
• magnets ø10x2mm | quantity: 16

Print instruction:

To prevent breakage within the layer when clamping in the prismatic recesses, I recommend printing the protective jaws flat. This results in greater structural stability.

• material: PETG or similar
• material support: PLA (in case of 1 print head, PETG is also fine)
• supports: required
• layer height: 0,25mm or 0,32mm
• nozzle diameter: 0,4mm or 0,6mm
• brim: not required
• enclosure: not required