speed

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.16mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #bb3d43 PLA BambuLab Matte Dark Red  Transmission Distance: 1.5
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Dark Red
    At layer #16 (1.36mm) swap to Sunflower Yellow
    At layer #20 (1.68mm) swap to White for the rest.