High-End Subwoofer Axiom von German-Precision-Audio

High-End Subwoofer  Axiom– 3D Printable Enclosure (Compatible with Visaton TIW 200XS)

 This 3D model represents the complete development of a high-end subwoofer designed for audiophile music and home cinema use. Engineered and acoustically tuned for the Visaton TIW 200XS and the Monacor SAM 300D amplifier module. 

Technical Data

• lower frequency -3dB at 28 Hz
• linear tuned
• bass reflex
• weight 10.6 kg

Model Dimensions 

• Enclosure: 398 mm × 394 mm × 447 mm (as oriented on the print bed) 

Print Settings 

• Printable with 0.4 mm or 0.8 mm nozzle (0.4 mm layer height when using 0.8 mm nozzle) 
• Infill: minimum 17 % 
• Wall thickness: 3.2 mm 
• with 0,8mm nozzle print 4 walls inner/outer/inner
• Mass of the whole construct 5kg
• Support material is only required beneath the speaker's sealing area

Required Components 

• Visaton TIW 200XS subwoofer driver 
• Monacor SAM 300D amplifier module 
• Binding posts with M5 thread 
• Speaker spikes
•  M4 cylinder head screws (10 pieces × 10 mm) 
• M4 heat-set threaded inserts (10 pieces) 
• M5 cylinder head screws (6 pieces × 10 mm) 
• M5 heat-set threaded inserts (6 pieces) 
• Sealing tape for under the speaker

Note: The matching high-end satellite system is also available and is called Tripod.**