Water / Beer Bottle / Can Holder

This is a holder for a water bottle I designed for a) bottles with a deformed bottom, b) to add a layer of safety when using a water bottle near electronics - ie. on your desk where your workstation is. I added a removable reducer ring so the holder could be used with a 500ml beer bottle or a 500/330ml can (Note: the can is slightly loose as the practicality of printing several reducer rings isn't viable - they would be thin and weak). Tested with a standard 500ml water bottle (insert in) and a 500ml / 568ml [pint] bottle (insert out). Also tested with a 500ml beer can and 330ml Coke can (insert  out). Deliberately thick walls to add some weight to the print to aid stability. Works well on a desk, next to you on the sofa etc. Please check the diameter of your preferred bottle/can before printing!

Print at 0.2, no supports, concentric ironed top.

This model is provided for free but I do accept tips for coffee! ;D https://ko-fi.com/ellnic

If you enjoy this model or its concept, I'd really appreciate a comment and like :)