Fire Extinguisher Mounting Plate for Qidi Plus 4

Mounting plate to hold a small adhesive-mounted automatic fire extinguisher inside the Qidi Plus 4 print chamber. The plate snaps in place above the chamber heater and provides a place to attach a small fire extinguisher out of the way of the bed and gantry. This is designed to work with the original factory chamber heater.

I'd recommend printing with a material that can withstand the heated chamber temperatures. It helps if it's something that is able to flex a little bit to assist with getting it into place. I used polycarbonate for this.

Hopefully this isn't necessary, but it might help slow down a dangerous situation.

Here's the automatic fire extinguisher I used: https://www.amazon.com/dp/B09YS6DJWN