iFixit Mako Multiboard Mount

I had to redesign the model, because the magnet positions on my iFixit Mako case, are different.
Additionally I opted for the Rail-Pop Ins, which I really like for their secure connection.
If your magnets seem too weak you can stack two together. I use this setup with two 6x2mm magnets stacked.

Parts to be printed on their bottom.

Required Parts

• The provided 3D printed parts
• Six 6x3mm magnets
• Super glue to glue the magnets
• Four Pop-Ins Multiconnect (OI/OX) connectors
  • Two OI connectors for the bottom piece, two OX for the top.
     

• Position of magnets
• Connector used