Bobcat skid steer RAM-Mount Adapter – 3D Printed Phone/Device Holder

Need a solid way to attach your phone—or any other RAM-Mount compatible device—to your Bobcat?
This two-part mount is designed to fit the steel cage cutouts found on M-series (M3) machines and provides a rock-solid connection with zero play.

Features

Two-piece design joined with five bolts and nuts for exceptional rigidity.

B-size RAM ball (1 in / 25.4 mm) for universal RAM-Mount accessories.

Plenty of clearance so the cab window opens and closes freely after installation.

Compatibility

Tested on an M3-series Bobcat skid steer. It should fit other Bobcat models with the same cage cut-outs, but hasn’t been tested on newer or older machines.

Print Settings

Material: PETG

Infill: 60 %

Perimeters/Outer Walls: 4
This combination delivers excellent stiffness and virtually no flex.

Hardware Needed

5 × M4 nuts

4 × M4 × 20 mm bolts

1 × M4 × 45 mm bolt

Assembly

Print both parts, join them with the hardware above, and mount anywhere along the Bobcat’s steel cage cutouts—no extra brackets required.