Bulb shade - Sansi 24w Bulb Reflector

Description : I designed this shade to get the most out of my Sansi 24w grow light. It focuses all the light directly onto my houseplants, boosting their growth and preventing glare in the room. The model shown was printed using the 'Fuzzy Skin' setting in the slicer for a unique, textured finish.

Tested and approved, it has been running 10h/day for months in PLA with no signs of warping. It is barely warm to the touch.

Print Settings:

• Material: PLA
• Supports: None
• Nozzle: 0.4mm (This results in a 2-perimeter wall thickness)
• Layer height: 0.2mm

Dimensions:

• Overall height: 129mm
• Inside diameter: 123mm
• Hole diameter (for socket): 36mm

WARNING: Designed for a Sansi 24w LED bulb. If using a different bulb, verify dimensions and heat output to avoid any risk of melting or even a fire.