Funnel For SolidSteel Speaker Stands

This is a small funnel designed to fit in the 6.78mm inner diameter holes of the SolidSteel speaker stands. It can be printed in less than 30 mins with vase mode.

I printed this on a Core One, 0.6mm HF Obsidian nozzle, Voxel PETG, vase mode. I was able to finish it in 22 mins easily. 

It fits in the speaker stands perfectly. About 1 lbs (454g) of kiln dried aquarium sand was needed to fill each leg up to 75%. That looks like just under 2 cups for anyone who wants to eyeball it. Total, it was ~6.75lbs for two SS-6 stands. 

Hopefully this helps you as it did me!

To anyone who wants to make it better, you could lengthen the funnel stem to where the stand leg will be 75% filled that way there is no guesswork. The user then sticks the funnel in, fills with inert filler until the flow stops. Remove any excess material left in the funnel top then remove the funnel. You're done with that leg!