Raspberry Pi Rack Rack - MODS
Description
PDFThe original design was fantastic, but I found I needed to make a few changes to work with what I had.
The Faceplate was modified to accept an SSD1306 128x32 OLED. I've found there are a bit easier and cheaper to acquire. It's a good fit that should stay in place, though a dab of hot glue wouldn't hurt. I also extended the mounting holes for the fan screws just a bit to better accommodate the hardware I had without trying to push through the front.
The Pi 3-4 Tray was modified to allow using M2.6 screws to mount the Pi to the base. I found the stubs in the original to be fragile and prone to popping off.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Faceplate - remixed to fix SSD1306 128x32 OLED / Added a couple mm of depth to the fan screw holes to allow for what I had available.
RPi 3-4 Trey - reconfigured mount points to allow using M2.5 screws to attach Pi to base.
