Feast for Odin Resource Trays (Prusa Mini)

This project includes three modifications to Stinkfoot's A Feast for Odin insert. Resource Tray I have a Prusa Mini…
0
9
0
284
updated February 28, 2022

Description

PDF

This project includes three modifications to Stinkfoot's A Feast for Odin insert.

Resource Tray

I have a Prusa Mini which only has a limited 18x18x18 print bed. So I took the resource tray from Stinkfoot71's design and splits it in two, as well as increases the wall width in the resource tray. With this design, if you rotate the parts to a 45 degree angle it will just fit on the Prusa Mini bed. You will need to disable the skirt for part1 though.

Island Tray

I needed to increase the depth to fit all my island tiles in here, unsure why I had this issue but seems I'm not the only one, perhaps the tile thickness has changed? Dr Hellknow actually already did this (you'll find his stl in the comments of the Remix), but his design seemed to have a ridge in it so I re-did it. I also increased the depth of the gap to help lift the tiles out.

Viking Tray

I've added a resized vikings tray. The original vikings tray didn't neatly fill the space available to it, and I prefer not to have any excess space so I increased the width of the tray slightly so it fills all the available space.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

200

Infill:

15

Filament: eSun PLA+

Category: Games

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License