Adventure Force Boxer Pro Shredder Kit

Update 10/3/25: Added a fitment test for the ammo box cover. Print first to guarantee fitment of the cover. 

Shredder Kit

This kit was hand designed from the ground up to turn your Boxer Pro into the ultimate foam battlefield shredder. Name inspired by a certain group of adolescent turtles. 

Loaded with features and alternate parts for customizing to your needs. 

Features

• Zero Hardware Assembly 

• No Blaster Modification for Installation

• Pre-Grouped Prints for Easy Slicing

• Raised and Extended Picatinny Rails

• Extended Stock

• Handguard 

• Carry Handle 

• Ammo Box Cover

Support and Printing 

All models are oriented how I printed them but you may have better luck with a different orientation. Requires a build volume of at least 206mm x 206mm x 195mm. 

Parts that require support (be sure your supports are well tuned) 

• Boxer_FrontPic

• Boxer_ExFrontPic

• Boxer_MidPic

• Boxer_RearPic

• Boxer_Stock (tree for both versions)

• Boxer_StockCovers

• Boxer_StockCoversH (tree) 

• Boxer_HandleBase

You can adjust the scale of the printed pins in your slicer if they are too tight or loose.

While installing the stock, you may notice the stock pins appear to be a couple mm off. This is by design to insure the pins put resistance against the original stock preventing it from sliding. Insert pins from opposite sides and use needle nose pliers or a flat head screw driver to push into place. 

Further information can be found in the model descriptions. If you have any questions or need a model adjusted, please message me. 

Filament

• Elegoo PLA Basic (Apple Green and Hot Pink Spool-Free) https://us.elegoo.com/products/pla-basic-filament-1-75mm-colored-1kg 

• Elegoo PLA Plus (Black) https://us.elegoo.com/products/elegoo-pla-plus-3d-printer-filament-1-75mm-colored-1kg 

Collection of Boxer Accessories https://www.printables.com/@Ghostmanta_3143708/collections/2643130