Arkham Horror - Card Decks Sorter

This is a gigantic sorter designed for Arkham Horror 2nd Edition, but should work for any Fantasy Flight game, and for games of other manufacturers if they use the same size cards.

Each deck holder should be large enough for all of the location cards from all expansions for 2nd Edition Arkham. Each also includes a discarder. I realize that the game calls for reshuffling each time, but nobody I know actually plays it that way, so I included the discarders for ease of play.

No supports should be needed for any parts except the top small card holders. Even that probably doesn't need supports if your bridging is good.

The pieces are all printed separately, meant to be glued together, so that you can print what you need for however many expansions you like. Should work on all but the smallest print volumes. If you go 3 tiers high, it'll become back-heavy. There are small holes in the back of the small card pieces which fit the 6-inch long, 6mm diameter dowels sold in the craft isle at Walmart. a 3 tier sorter uses the dowels directly, a 4 tier sorter uses the dowels with the included pillar supports. Pillar supports are printed in two pieces for ease of printability and filament economy.

This is part of a larger project to make Arkham Horror fit into a much smaller space and to store it efficiently. Other parts of the project may be found here:

https://www.thingiverse.com/mikaselm/collections/arkham-sorter-deluxe

Print Settings

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: PolyMaker PLA