This model is a minimalistic rounded bar stand with angled supports for stability.
It is suitable for various DIY applications such as holding rods, tubes, or cables in place.
Designed with a smooth cylindrical shape for easy printing.
Optimized for PLA matte filament for a clean look.
Requires tree supports for the underside to ensure good surface quality.
Recommended print settings:
Layer height: 0.12 mm
Perimeters (walls): 3
Top layers: 5, Bottom layers: 3
Infill: 15% (Grid or Gyroid works well)
Supports: Tree, with 2–3 interface layers
Material: PLA Matte (or PLA/PETG as alternative)
This stand was tested with screw mount integration and works well for lightweight applications.
The author marked this model as their own original creation.
