Shotgun Mic Shock Mount with 1/4-20 Thread Mounting

Needed a shock mount for my Sennheiser MKH416, since none of the local stores had one in stock. Created this. Should work with all 19mm diameter Shotgun mics. Has a hirth coupling to allow pivoting the mic at 10 degree increments. 

I recommend printing the base and top out of something pretty rigid/strong like PC CF or PETG CF with decent infill/walls (50% cubic, 6 walls is what I used)

The suspension/shock mounting portion should be printed in normal PETG for its flexibility with ~5 walls and 100% infill.

Hardware:
- 2x M3x16mm screw
- 1x M5x20mm screw

Doesn't require exact length screws for it to work, that's just what I designed for.

reused this as the suspension in my shock mount. thickened the center to work with 19mm diameter mics.