Ender 5 Extended and Vented Electronics Box Cover

This cover will allow mounting of a Noctua 92x14mm fan to more effectively cool the mainboard. In my case, I have the electronics box mounted vertically so I didn't have to replace the stock wires when adding cable chains. Extending the cover also provides enough space for the PSU fan to be replaced with a 92mm Noctua fan. The noise levels are significantly reduced with this upgrade.

The pieces are interchangeable, so you can use a combination of the two or the same for both sides.

The slit vent model was made so the longer vents can easily have the covers removed if you require more ventilation.

You'll need:

4x M3x10 socket cap screws to secure the cover to the box

4x M3x5 socket cap screws to fasten the pieces together

4x M3 nuts

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

Any

Infill:

10

Filament: Any ABS, ASA, PETG, PLA Any