(Un)original Drybox with Door Magnets

Trying to seal the heated drybox slim as best as possible. used silicone on all joints of the beams and used seal tape on all windows. after installing all new beans with magnets I added magnets at the outside of the plexiglass door as well with some glue. also I added a 0.5mm thin sealing tape on top of the magnets on all beams towards the plexiglass.

also don't forgetting to close around the cable entry.

also increased the silica box to keep moisture down for a longer time.

Print settings and orientation like the original parts.

3 perimeter

25% infill

PETG 0.4mm nozzle

added magnets to the beams around the plexiglass door