PENELOPE Vase - Home Decor - Interior Design

Bring a touch of elegance and modernity to your home with this stunning spiral-designed vase. Its fluid, wavy lines create a dynamic and sophisticated visual effect, capturing light and attention from every angle.

Perfect as a standalone decorative piece or for holding dried flowers (like the cute "bunny tails" in the photo), this vase beautifully complements any interior design style, from minimalist to contemporary. Its shape, featuring a wide base that tapers towards the neck, ensures stability and a refined aesthetic.

This is an easy and fast object to print, ideal for anyone looking to create an impressive piece of home decor with minimal effort.

Printing Recommendations 📝

This model is specifically designed to be printed in Spiral Vase Mode (also known as "Spiralize Outer Contour" in Cura/PrusaSlicer). This mode creates an object with a single, continuous outer perimeter, making it watertight and free of visible seams.

Here are the recommended settings for an optimal result like the one pictured:

Print Mode: Spiral Vase Mode ENABLED.

Layer Height: 0.2 mm for a good balance between speed and quality.

Outer Wall Line Width: 0.8 mm. This is a key parameter to achieve a thick and sturdy wall, even when using a standard 0.4 mm nozzle. This will make the vase feel solid and robust.

Solid Bottom Layers: Set between 5 and 7 layers. This will ensure a solid, stable, and perfectly watertight base.

Print Speed: A moderate speed (e.g., 40-50 mm/s) is recommended to ensure perfect layer adhesion and a smooth finish.

Infill: 0% (this is handled automatically by vase mode).

Supports: None required. The design is optimized to be printed without any supports.

Material: PLA or PETG are perfect choices. PLA offers a crisp, matte finish, while PETG adds extra durability and a slight translucency.

With these settings, you will have an elegant and functional vase in just a few hours. Happy printing! ✨