Yaesu FTX-1 Optima cover

This is a remix; the original doesn’t fit properly when the FTX-1 is mounted on an Optima PA unit. I also removed the elastic band tabs on the side, since they interfere when the unit is placed on its side.

Printed with a 0.6 mm nozzle and fuzzy skin on the outside. For customization, I used the Yaesu logo as a cutout on the front and added my callsign below it. This step is optional. If you’d like to do the same, please refer to the PrusaSlicer manual on how to perform a cutout with another STL file.

I made cutouts in the cover so it fits while the FTX-1 is mounted on an Optima PA unit.