Prototype Jeep testing hueforge

https://www.motortrend.com/features/1406-1940-bantam-jeep-brc-1007-encyclopedia

Project: jeepjump.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x154.5mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:

      PLA+ Esun Black Transmission Distance: 0.1

      PLA+ Esun Olive Green Transmission Distance: 1.5

      PLA PolyLite Pro Army Beige Transmission Distance: 1

      PLA+ Esun Bone White Transmission Distance: 6

      PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

      Start with Black

      At layer #7 (0.64mm) swap to Olive Green

      At layer #9 (0.8mm) swap to Army Beige

      At layer #11 (0.96mm) swap to Bone White

      At layer #18 (1.52mm) swap to White for the rest.