E3D REVO nozzle storage and adapter

E3D Revo nozzle holder that fits on Z-axis top bracket of a Prusa MK3(S). Includes adapter to screw, unscrew nozzle.
15
80
2
539
updated February 28, 2022

Description

PDF

After upgrading my Prusa MK3S with the new E3D REVO nozzle system, I was left with three questions:

  1. How am I going to remember what color is what nozzle size? This after I tried to print a 0.25 mm test with a 0.8 mm nozzle…
  2. Where am I going to keep the nozzles? These are not cheap.
  3. How can I more easily screw and unscrew the nozzles? The system is great but there is very little room around the extruder to easily grip the nozzle.

So after a few designs, this is what I came up with: a REVO nozzle storage that fits on the Z-axis top brace with room for 4 nozzles and an adapter that grips the nozzle tightly so you have more room to switch nozzles. I have also added the color and it's nozzle size so one does not have to google for “what size is this?”.

And yes, I will replace the print with a Prusa Orange one once it gets here.

Printed with Prusament PLA. Needs "supports from build plate only" enabled.

Tags



Model origin

The author hasn't provided the model origin yet.

License