Sturdy Riser LED Switch Mod

I wanted to add LEDs with an external switch but also wanted the riser to remain modular to be removed for printer maintenance, etc. The difference between the 2 stock led bars and these LEDs is CRAZY!  The only alterations I made to the OG sturdy riser are below. Both the switch and power connector fit like a glove. It's a tight spot so I just hooked the wires through the switch prongs and secured with heat shrink.

• Added a switch cutout to corner_fr_rl_power
• Tweaked the power cutout because it was too small for my connector

Parts I used are below plus 22 gauge wire, a splice, & some heat shrink I had already.

• Lights: https://a.co/d/4tMub35
• Power Supply: https://a.co/d/77hrxqw 
• Switch: https://a.co/d/dVovAER 

Added a switch cutout to the power corner & tweaked the power cutout because it was too small.